A833 to 727 Swap - Parts List?

First, have you considered advertising in FABO to see if there was anybody looking to do an Auto to manual swap that you could do a trade with? You will have to decide if money would have to change hands in addition to the swap. I cannot speak on the TCI issue. I did an Automatic to 4 speed conversion, so I can tell you what I did in reverse. I hope this is a complete list. I am going from memory. You will need:
1. Transmission, torque converter and flexplate.
2. Might not need rear transmission cross brace mount. The one for the 4 speed and automatic were the same in my 69 Barracuda.
3. Transmission cooler or radiator with built in tranny cooler.
4. Tranny cooler lines.
5. Shift linkage.
6. Kickdown linkage.
7. Starter relay for an automatic (for the neutral safety switch circuit).
8. different drive shaft.
9. Tranny dipstick and tube.
10. Pedal assembly. Technically you could make what you have work, but you should be able to sell your pedal assembly for more than enough to get an Auto pedal assembly.
11. Rubber plug to plug the clutch rod hole in the firewall.
12. Different dust cover.