7875 + 5.9 + E85 + Megasquirt
ms3 is installed on the pass side kick panel. I still have some clean-up to do. I used a lot of crimp connections inside, but everything under the hood I took my time and tinned all wires, soldered all connections and sealed with heat shrink tube, tape and/or wire loom. So far, that's been the most time consuming part of this project.
ms3 is installed on the pass side kick panel. I still have some clean-up to do. I used a lot of crimp connections inside, but everything under the hood I took my time and tinned all wires, soldered all connections and sealed with heat shrink tube, tape and/or wire loom. So far, that's been the most time consuming part of this project.
