Cams for otherwise Stock 5.9 Magnums?
The stock 5.9L cam had very low lift at .398 if memory serves.
This is what I have for the stock 5.2 and 5.9 cams....
5.9 Magnum Hydraulic Roller 410/417 249/269 109CL
The measured lift on the 5.9 is more than either of those numbers.
Here is a thread where someone cam doctored a 1998 5.9 cam. His cam specs:
Duration @ .050 IN:189 EX:194
Valve lift with 1.6 Rockers IN:.439 EX:448
The lobe centerline IN:106.5 EX:114.5
Lobe separation and its 110.6
The numbers I got from Bullet when they cam doctored my used 2002 5.9 cam before regrinding it:
Duration @ 0.050: I/E 189*/194*
Lift @ cam: I/E 0.273"/0.278"
Valve lift w/ 1.6 rockers: I/E 0.437”/0.445”
Lobe separation angle: 111*
