early a body torsion bar ?

so here's an update, so i got the bb torsion bars, thanks eddie, removed the uca bump stop, dropped down the lca, put the torsion bar boots in boiling water, cut a transmission fluid funnel to the size of the hex on the torsion bar then slid the boots up the funnel end and onto the tbars no problem...then loosened the adjuster bolt almost all the way out, and made sure the lca hex was turned down, slid the bars right in no fighting them, ran the adjuster in to where the head of the adjuster was flush with the bottom of the lca, with the lca pivot nut loose, lowered the car off the stands, it is up on its own...bounced it up and down a few times shocks are not on yet. not sure howto adjust the uca cam bolts good enough to test drive it...thoughts?