67 Barracuda Front Door Window Felts

67 Barracuda Front Door Window Felts

@RPM440+6 Sorry, I have no spd on 67 doors. I took pics of 69 vert doors but didnt get measurements, sorry forgot the tape measure lol. What I noticed is the 69 inner felt is quite different in that the "chrome" is a different profile and much wider. I'll get pics with measurements.
Back to the 67 inners and outers with my uneducated eyes....both appear to have same profile and length. Altho the inner is set slightly further back by about 1/4" the inner has the 90* bend for approx 1/4". So equal length and similar profile. Could they swap inside to out? Hope that makes sense.
Heres pics of 69, I'll get some with measurements.

RPM440+6 said
@4spdragtop, thanks for the photos of the 67 door. From looking at the samples sent by the customer to what we have been using, we are finding that the difference is the outer door felts for a 67 door, the inners are the same from 67 to 69. The 67 outers measure 27 and 13/16 inches where the 68 and 69 measure 28 and 1/4 inches for a difference of 7/16 inches.

Not only is the overall length different, the attaching clip location is different for the 67 Fastback year model.

So with that said, was it a change in production, plant, etc? From looking at the parts numbers running the three year spread, I am thinking that it might have been an early production run and they went to the new design sometime late in the 66 or early 67 physical year. But you would think that they would have listed the original part number and created a new number for the longer felt. Again, never say never.

Just find it interesting that it took all of these years to see this issue come to our attention. That is why I am thinking it was only a early production difference. @4spdragtop, do you happen to know the scheduled build date for the car with the 67 doors?

Thanks for the input and still open to ideals on the issue.