hemi scoop

-
warrendodge

warrendodge

Well-Known Member
Joined
Oct 12, 2011
Messages
53
Reaction score
16
Location
Auckland New Zealand
just unpacked my hemi scoop from AAR fiberglass (stinger fiberglass) and it is a pile of crap bubbles in the gelcoat mounting stud's put in on angles it was the most expensive of them all and i thought the qaulity would be up there but no so what is a good brand to buy this scoop cost me over $1000 nz dollars and took 5 months to get here will never buy anything again from them
 
That’s a suck deal. I’ve heard the AAR fiberglass is one of the better places.
 
Last edited:
warrendodge said:
just unpacked my hemi scoop from AAR fiberglass (stinger fiberglass) and it is a pile of crap bubbles in the gelcoat mounting stud's put in on angles it was the most expensive of them all and i thought the qaulity would be up there but no so what is a good brand to buy this scoop cost me over $1000 nz dollars and took 5 months to get here will never buy anything again from them
Click to expand...
They should've wrapped it in a sheet before placing bubble wrap around it. I've seen similar problems years ago with painted parts.
 
warrendodge said:
just unpacked my hemi scoop from AAR fiberglass (stinger fiberglass) and it is a pile of crap bubbles in the gelcoat mounting stud's put in on angles it was the most expensive of them all and i thought the qaulity would be up there but no so what is a good brand to buy this scoop cost me over $1000 nz dollars and took 5 months to get here will never buy anything again from them
Click to expand...


i would be pissed also . here's an idea . take it to a local fiberglass guy maybe he can use it for a mold and make you one and then send it back to the U.S.A. i have done this before with poor quality parts . fiberglass boat builders are the ticket .
 
warrendodge said:
just unpacked my hemi scoop from AAR fiberglass (stinger fiberglass) and it is a pile of crap bubbles in the gelcoat mounting stud's put in on angles it was the most expensive of them all and i thought the qaulity would be up there but no so what is a good brand to buy this scoop cost me over $1000 nz dollars and took 5 months to get here will never buy anything again from them
Click to expand...

$1000 FOR A $150 SCOOP AT MOST !!??
 
worthless27-jpg.jpg
 
I'd hate to think they had a bad one in stock and sent it to a guy in NZ because he probably wouldn't return it.

Can you get a full or partial refund from PayPal or your credit card company?
 
That really sucks. They should take care of that for you tho. I've bought several fenders, hoods , trunk lids, valances etc from them and fitment or quality was never an issue. Always a very nice, quality product. I would atleast contact them with some pics.
 
warrendodge said:
scoop cost 350 usd 70 usd freight so $420 usd = in nz$ 609 freght to nz $275 tax $132 total $1016 our $only worth 69c compared to usd
Click to expand...
I bought the 68 replica hemi scoop from stinger aswell and was absolutely perfect. When I received it there was no stanchions in the box so I called and two days later they arrived. I found them very good, give em a shout to see what they will do for you.
 
Last edited:
I got a hood and scoop from AAR last year and it was 100%. I was extremely happy with AAR.
Compared to another hood that I received from another fibreglass dealer, AAR was heaven sent.

Check out this quality fibreglass (not from AAR) that was sent to me... was not cheap neither. Pic below is the finished corner that meets the fender
8CDC5C96-26C7-4CF0-8C5F-50A8A05156F3.jpeg


Top of hood that meets with the windshield cowl and fender...
1594CCA0-4540-4BFC-9536-59302FE1CAAD.jpeg


Opposite corner at cowl area, hood came out of the mold with a pothole..
FE4B82F0-3EFF-4D89-A51F-D8626126B2F7.jpeg


No refund and my fault for not unpackaging and inspecting it at the loading doc.. This was a fibreglass nightmare..
 
Last edited:
Malex said:
I got a hood and scoop from AAR last year and it was 100%. Compared to another hood that I received from another fibreglass dealer AAR was heaven sent.

Check out this quality fibreglass that was sent to me... was not cheap neither. Pic below is the finished corner that meets the fender
View attachment 1715664597

Top of hood that meets with the windshield cowl and fender...
View attachment 1715664599

Opposite corner at cowl area, hood came out of the mold with a pothole..
View attachment 1715664598

No refund and my fault for not unpackaging and inspecting it at the loading doc.. This was a fibreglass nightmare..
Click to expand...



that is disgraceful. i would be pissed also . Did you send them some pics? if so and wont refund your money they are not a standup company . send them a link to this thread .
 
Horrific! Was that from a company in Ontario?
Malex said:
I got a hood and scoop from AAR last year and it was 100%. Compared to another hood that I received from another fibreglass dealer AAR was heaven sent.

Check out this quality fibreglass that was sent to me... was not cheap neither. Pic below is the finished corner that meets the fender
View attachment 1715664597

Top of hood that meets with the windshield cowl and fender...
View attachment 1715664599

Opposite corner at cowl area, hood came out of the mold with a pothole..
View attachment 1715664598

No refund and my fault for not unpackaging and inspecting it at the loading doc.. This was a fibreglass nightmare..
Click to expand...
 
You must log in or register to reply here.
-

Back
Top