[WANTED] 340 Block

-
Status
Not open for further replies.
siuauto

siuauto

Well-Known Member
Joined
Jan 9, 2008
Messages
431
Reaction score
79
Location
Joliet Illinois
Rating - 100%
1   0   0
Contact seller
I am looking for a 340 in standard bore or .020 over that is fresh out of the machine shop. Located in Illinois but willing to drive a reasonable distance to pick up.
 
I got one .030 over fresh out machine shop 8 yrs ago...been sitting could use a hone... has new brass freeze plugs and new cam bearings...hot tanked also.....$900 it's in SC....can palletize and ship by fastenal....also steel crank avail and big valve J heads
 
Mtrhead said:
I got one .030 over fresh out machine shop 8 yrs ago...been sitting could use a hone... has new brass freeze plugs and new cam bearings...hot tanked also.....$900 it's in SC....can palletize and ship by fastenal....also steel crank avail and big valve J heads
Click to expand...
Thank you for your response, my pistons are for a .020 block which is why I need it to be standard or .020 over. I wish your block would work for me.
 
10-4..I figured you already had .020 slugs...no problem and good luck!!!
 
I’m in St. Louis if you want a 20 over I have three that could be done. None have been to the machine shop they are std bore I get 500 with caps and whatever the machine work is
 
There are 10 in Nevada! Would ship im sure.....@GTX JOHN
 
Last edited:
I’m sure out of ten you can find what you want
 
d5667 said:
I’m in St. Louis if you want a 20 over I have three that could be done. None have been to the machine shop they are std bore I get 500 with caps and whatever the machine work is
Click to expand...
What years do you have and could you send pics? I have no problem driving down to STL to grab a block
 
They start at 67 and go to 73. None are cleaned they are oily. Are you looking for a year or just a 340? The bulk are 69 year
 
Let me put a mic on the 71 I don’t remember it’s condition. I’m going to indy and could meet you in Springfield if this works
 
I have a spot. Anything else you need let me know I’m taking more big block parts than 340 stuff but I have plenty of small block parts too. A-B and truck parts
 
d5667 said:
I have a spot. Anything else you need let me know I’m taking more big block parts than 340 stuff but I have plenty of small block parts too. A-B and truck parts
Click to expand...

Do you have any suregrip center sections? 3.55, 3.73, 3.91

Do you have any interior parts for a 87 D150? most of the plastic trim pieces are broken so if you you have any, let me know

Also, I'm putting together a 70 Super Bee and I think I am going to be missing some body bolts and trip clips for the the windshield and back window trim on. If you have any of these, I would be interested
 
I have a good 741-391 suregrip what color trim and I do have clips
 
450 for the suregrip-it was in my pickup working great and I changed to road gears. I’ll check on the blue pieces.
 
d5667 said:
I’m in St. Louis if you want a 20 over I have three that could be done. None have been to the machine shop they are std bore I get 500 with caps and whatever the machine work is
Click to expand...
I’m also looking for std bore 340 block if you still have one thanks
 
d5667 said:
450 for the suregrip-it was in my pickup working great and I changed to road gears. I’ll check on the blue pieces.
Click to expand...
Very Interested in the Suregrip. Would you mind sending pics of everything when you get a chance.
 
Sure-I’m in Montana right now and as soon as I get back I’ll post them
 
Status
Not open for further replies.
-

Back
Top