[WANTED] Help! Need Output Flange for B&T 4-Speed

-
Status
Not open for further replies.
eekvonzipper

eekvonzipper

My Member is Legendary!
FABO Gold Member
Joined
Apr 18, 2020
Messages
1,462
Reaction score
1,528
Location
Cadet, Missouri
Rating - 100%
16   0   0
Contact seller
Anyone have this Flange?
I bought the wrong one from a member here that has a 4 1/4" Diameter (Pictured Left)
The One I need is 3 3/4" Diameter (Pictured Right)
it's for a 1965 Ball and Trunnion Barracuda 4-Speed w/ the 3.09 gear.
Mine is badly pitted in the Seal area and the threads are all clapped out...
Would also Send you the larger diameter one if needed

o flange.jpg
 
I’ll see if I have a pic. No pic of the tranny tail shaft end. U can see that the tail shaft under the tranny mount doesn’t have the plate for the bearing retainer snap ring. Kim

00297C9A-202E-4643-A306-FB2447361B7D.jpeg


74F4F39F-CE54-4CEC-B9AB-C2D14BFC9BAA.jpeg


1896E711-691E-49B2-85C6-F34CF29072D0.jpeg


8328FBB6-B178-4F00-BAEE-6AC8AC0A9749.jpeg


37892B4E-3C3F-45A1-98DA-1AD366614E7C.jpeg


AFFD0FF7-66DF-457E-8B37-752BCB95C792.jpeg


0A160FCB-6BA7-4F8A-B9E6-FA265AB34920.jpeg
 
Last edited:
Status
Not open for further replies.
-

Back
Top