Brodix B1 BA MC Heads

-
Well what did you do did you go with a B1 heads
In my opinion the only problem with the B1 is modifying though headers to fit correctly
 
F21 said:
Well what did you do did you go with a B1 heads
In my opinion the only problem with the B1 is modifying though headers to fit correctly
Click to expand...
Well I went with w9 head's , I got a set off brett miller. I think it's my best option write know. I have to modify my exhaust no matter what way I go.
 
May I ask why you needed to go with an 18 bolt head?

I know you’re gonna run boost, what head gasket are you going to run?

Best of luck on your build!
 
MiradaMegaCab said:
May I ask why you needed to go with an 18 bolt head?

I know you’re gonna run boost, what head gasket are you going to run?

Best of luck on your build![/QUOT. Because it's the way to go. I ran 20 psi with my indy head's before I hert it and had no problems . It made around 1000 hp. I want to go higher and with 18 bolts and mls gaskets it should be no problem.i hoping for 1300 out of this new combo.
Click to expand...
 


What type of boost ? { Turbo, Procharger, Roots } Good Luck and please post results.
 
MiradaMegaCab said:
May I ask why you needed to go with an 18 bolt head?

I know you’re gonna run boost, what head gasket are you going to run?

Best of luck on your build!
Click to expand...
Not sure what happened . I'll try again. If you have the option , it's better . I've been running mls gaskets and they work pretty good. With my old motor I was running 20 psi with no gasket problems.
 
Yeah buddy, that’s a lot of boost!!!

May I ask why you didn’t O-Ring a 10 bolt head? pic for reference

7AFF6944-F83D-4459-B207-42B299A71F35.jpeg
 
MiradaMegaCab said:
Yeah buddy, that’s a lot of boost!!!

May I ask why you didn’t O-Ring a 10 bolt head? pic for reference

View attachment 1715675963
Click to expand...
That won't help you. The heads will still lift with 10 bolts. . That's why the racing block is 18 bolt . But yes my other motor is 18 bolt as well and it will be o ringed . That motor will see 35 psi. If your using a stock block your looking for trouble. I wouldn't go past 700 hp. I'm looking for a lot more. My w8 motor should be 1800 or more.
 
You must log in or register to reply here.
-

Back
Top