Cylinder Head Porting and Power Production
Yeah his heads are real exotic. have a look for yourself:
360 cast head porting
Now look at this very Exotic chamber
Expect to waste a week and a half to get a pair of heads to this level. This set going on a 353 c.i. engine, formerly a 318, and will make 500+ HP. About $1600 to get a set ready to bolt on like these, set up for a flat tappet cam. This set is also set up for 5/16" LS1 valves. About the cost of a set of edelbrocks that will need a $600 port job to be as good.
Yeah his heads are real exotic. have a look for yourself:
360 cast head porting
Now look at this very Exotic chamber
Expect to waste a week and a half to get a pair of heads to this level. This set going on a 353 c.i. engine, formerly a 318, and will make 500+ HP. About $1600 to get a set ready to bolt on like these, set up for a flat tappet cam. This set is also set up for 5/16" LS1 valves. About the cost of a set of edelbrocks that will need a $600 port job to be as good.
