Cleaned the hell out of the deck on the block......washed the milkshake down the pan...and out ....
Had a small change in plans......the SM heads probably wont be done at the machine shop for another 2 weeks....watch them call me on monday....lol
I have a set of Eddy head with very little run time on them....made about a dozen passes with them...I can see i changed out valve seals..and I set the spring height back then...
Spend some time getting the old intake gasket off...and cleaned the hell out of them.....and they are going to be used...
Got the eddy heads on ...torqued....got the tti headers on...pushrods...and stock rockers back in place...
Was going to use Eddy performer rpm that was on the heads because of the heat cross over...but the eddy heads have no manifold heat....or I upgraded to the Eddy Air gap...and it is just sitting on heads for photo shoot...
probably wont get it done until the middle of the week....as I gotta go take a trip on Monday....and need to pack some stuff tomorrow.....
View attachment 1715680854
View attachment 1715680855
