[SOLD] Small Block LA Edelbrock Head and Valve Set: NEW

-
Status
Not open for further replies.
JD Erisman

JD Erisman

Well-Known Member
Joined
Dec 26, 2016
Messages
120
Reaction score
48
Location
Alaska
Rating - 100%
1   0   0
Contact seller
I have a brand new Edelbrock aluminum head for a small block LA (60779), also comes with a brand new set of valves, seals, shims and locks for the same Edelbrock head. None of these were ever run on an engine. I ruined one head by trying to hog out the push rod holes, bad idea. Instead of just buying another Edelbrock head I went back to square one and didn’t use the remaining good head. From the head I ruined, I removed the valves, valve locks, shims and seal and bagged them as individual groups. When I received these heads I had a reputable machine shop disassemble them and clean them, they still had some casting material in them. Included is a new set of ARP cylinder head bolts, again, never used. You can purchase a bare Edelbrock head, minus the valves, for around $500 then install these brand new valve sets. The ARP bolts are about $80, new complete 60779 head is $770. A bare head is $600 (all Summit Racing prices). Asking $400 for the head, bolt kit and complete valve set, all are brand new-NEVER BEEN RUN ON AND ENGINE, NEVER EVEN INSTALLED. You pay shipping, to the furthest point in the continental USA is $115 via USPS Priority Mail. Might be less if you live considerably closer but that’s up to the Post Office. These are coming from Kenai, Alaska 99611
5EE56FBF-886E-4973-8977-5E30ABB79E14.jpeg
5D890B2A-6A64-4B5A-B8CC-E3AC16286888.jpeg
419D1A74-C5C1-46DC-8A52-20D40CC23BD9.jpeg
 
I guess I would be third in line.you never know, lmk
JD Erisman said:
I have a brand new Edelbrock aluminum head for a small block LA (60779), also comes with a brand new set of valves, seals, shims and locks for the same Edelbrock head. None of these were ever run on an engine. I ruined one head by trying to hog out the push rod holes, bad idea. Instead of just buying another Edelbrock head I went back to square one and didn’t use the remaining good head. From the head I ruined, I removed the valves, valve locks, shims and seal and bagged them as individual groups. When I received these heads I had a reputable machine shop disassemble them and clean them, they still had some casting material in them. Included is a new set of ARP cylinder head bolts, again, never used. You can purchase a bare Edelbrock head, minus the valves, for around $500 then install these brand new valve sets. The ARP bolts are about $80, new complete 60779 head is $770. A bare head is $600 (all Summit Racing prices). Asking $400 for the head, bolt kit and complete valve set, all are brand new-NEVER BEEN RUN ON AND ENGINE, NEVER EVEN INSTALLED. You pay shipping, to the furthest point in the continental USA is $115 via USPS Priority Mail. Might be less if you live considerably closer but that’s up to the Post Office. These are coming from Kenai, Alaska 99611View attachment 1715681071View attachment 1715681072View attachment 1715681073
Click to expand...
 
68fsh said:
I guess I would be third in line.you never know, lmk
Click to expand...
No one has actually responded to me asking for my PayPal address. I’ll give everyone else a few more hours to respond again, if they don’t it’s yours.
 
JD Erisman said:
No one has actually responded to me asking for my PayPal address. I’ll give everyone else a few more hours to respond again, if they don’t it’s yours.
Click to expand...
That’s the way it is now. Get used to it. As soon as u sell it the first in line will be whining u never gave them a chance. Kim
 
badlilred79 said:
Pass shipping 137.00 plus 15 insurance way to much for me thanks
Click to expand...
.

Did you not read my original post? I said $115 to the furstest location, that I could find. Yours was $137, is the extra $22 what killed it for you? Insurance is optional. If you think $400 for a $770 head plus all the valve train for a second head and $80 ARP bolts, all brand new, is too much then please don’t waste my time by responding in the first place and asking for a shipping quote.
 
Hello, after reading, l do not want to waste your time. I made a mistake, I needed the 60179 heads for the early high compression 340. This is a great deal for anyone looking to save big money. Good, luck on your sale.
QUOTE="JD Erisman, post: 1973329175, member: 49228"].

Did you not read my original post? I said $115 to the furstest location, that I could find. Yours was $137, is the extra $22 what killed it for you? Insurance is optional. If you think $400 for a $770 head plus all the valve train for a second head and $80 ARP bolts, all brand new, is too much then please don’t waste my time by responding in the first place and asking for a shipping quote.[/QUOTE]
 
68fsh said:
Hello, after reading, l do not want to waste your time. I made a mistake, I needed the 60179 heads for the early high compression 340. This is a great deal for anyone looking to save big money. Good, luck on your sale.
QUOTE="JD Erisman, post: 1973329175, member: 49228"].

Did you not read my original post? I said $115 to the furstest location, that I could find. Yours was $137, is the extra $22 what killed it for you? Insurance is optional. If you think $400 for a $770 head plus all the valve train for a second head and $80 ARP bolts, all brand new, is too much then please don’t waste my time by responding in the first place and asking for a shipping quote.
Click to expand...
[/QUOTE]
Thanks, I appreciate your response. Good luck finding the right heads for your build. JD
 
So is this sold? If not I'm interested...send me you Paypal shipping to 20180.
 
Status
Not open for further replies.
-

Back
Top