dano said

With the QA1 lower control arms, are there any mounting tabs for a bar? If so are they for the 72-down bar or the 73-up? This will correlate to what K-Frame you have for mounting.

Below is my 69 with an Addco bar and 72-down stock arms. It has a small "dog leg" in it to clear lock to lock. I guess it will depend on the bar, wheel offset and wire width. This is a 17x7 with a 215 wide tire.

View attachment 1715681682

Click to expand...

dano said

With the QA1 lower control arms, are there any mounting tabs for a bar? If so are they for the 72-down bar or the 73-up? This will correlate to what K-Frame you have for mounting.

Below is my 69 with an Addco bar and 72-down stock arms. It has a small "dog leg" in it to clear lock to lock. I guess it will depend on the bar, wheel offset and wire width. This is a 17x7 with a 215 wide tire.

View attachment 1715681682

Click to expand...

abodyjoe said

what are you doing with the car?

i can tell you on our dart i have been running 1" bars for years with no swap bar pretty much because i was just too lazy to buy and install one. thought the car handled pretty well and stayed pretty flat in corners.. early in 2020 i finally broke down and bought a hellwig 5906 (1 1/8") sway bar for it and installed it. the difference was very noticeable.. the car is a lot flatter in corners now. just feels a lot better to me.. i'm not sure that piacular bar will fit your car with the qa1 lower arms.

Click to expand...

dano said

With the QA1 lower control arms, are there any mounting tabs for a bar? If so are they for the 72-down bar or the 73-up? This will correlate to what K-Frame you have for mounting.

Below is my 69 with an Addco bar and 72-down stock arms. It has a small "dog leg" in it to clear lock to lock. I guess it will depend on the bar, wheel offset and wire width. This is a 17x7 with a 215 wide tire.

View attachment 1715681682

Click to expand...