Sway Bar yes or no

dano said
With the QA1 lower control arms, are there any mounting tabs for a bar? If so are they for the 72-down bar or the 73-up? This will correlate to what K-Frame you have for mounting.

Below is my 69 with an Addco bar and 72-down stock arms. It has a small "dog leg" in it to clear lock to lock. I guess it will depend on the bar, wheel offset and wire width. This is a 17x7 with a 215 wide tire.

View attachment 1715681682

I8NEMO said
LCA is PN 52307, not sure how that correlates to 72-down/73-up. Wheels are 17 x 9's

Looks like ive got the mount tab, QA1 p.n. 52307, not sure how that correlates to 72- down, 73- up

The QA1 LCA’s have sway bar tabs. Their location is very similar to the 73+ factory locations. It’s not identical, but it’s close enough that bars intended for 73+ factory sway bar tabs work just fine, usually with a shorter end link because of the height profile difference of the tubular LCA’s compared to stock.

If you have a 67-72 K frame, you’ll need the Hotchkis 67-72 front sway bar or the Hellwig 55917. Both will work with the QA1 LCA sway bar tab location.

If you’re going to run 17” rims with decent tires you will probably benefit from the sway bars. It will depend on your tire choice and torsion bars, and there’s nothing wrong with driving through car first. But you’re probably going to benefit from the sway bars.