67 dart stroker hellcat gen3 hemi with twin turbos...

i should clarify the sensors that do NOT work.
1. cam sensor sync error. goes to 30+° according to system log. yet it does not have vvt. it is locked out at the cam gear.
^^^ this is in the main harness prepinned from holley fyi.

2. a seperate harness for additional inputs/outputs that go to the ecu on a different plug in harness. NON and i mean NON of these work. these all have proper voltage signal and ground wire readings to be operational. they just ******* dont and never have worked.
2.1 my boost controllers(solynoids x2) did work but stopped right after first attempt to use them. made target boost etc... gave an error in the data log and have never worked or clicked like they have power to them ever since. yet they DO have power to them.

i am currently looking for a pin out map from holley on the i/o harness for the hp ecu. should better explain if something is wrong or has a broken wire. only 25-32 pins to check at a plug end that is the size of a half dollar. being inspected by a nearly blind person. lol