Factory disc brake rotor question
Hey Steve, I believe that I sent this picture to you before but maybe it will help you again. Those do look like the KH hubs that were on my 68 with factory disc brakes and I did get my replacement rotors from Rock Auto. The picture you have there is the back side of the hubs, the rotors sit on the backs and then you press the wheel studs in through the new rotor and into the hub that is what holds the rotor firm and in place, look at the marks on top of my old rotors they rest on those humps on the back side of the hubs. You can see from my picture that I replaced all 10 of my wheel studs, and I installed all right hand thread. I have a for sale add on here for an assortment of wheel studs and lug nuts with both left hand disc brake wheel studs and right hand disc brake wheel studs if you are still looking. Take one of your rotors and lay it on the back side of the hub and you will see that you need to press the wheel stud in place and no the disc brake wheel studs are not swedged. there is also a picture of the wheel studs and lug nuts.
Bob
Hey Steve, I believe that I sent this picture to you before but maybe it will help you again. Those do look like the KH hubs that were on my 68 with factory disc brakes and I did get my replacement rotors from Rock Auto. The picture you have there is the back side of the hubs, the rotors sit on the backs and then you press the wheel studs in through the new rotor and into the hub that is what holds the rotor firm and in place, look at the marks on top of my old rotors they rest on those humps on the back side of the hubs. You can see from my picture that I replaced all 10 of my wheel studs, and I installed all right hand thread. I have a for sale add on here for an assortment of wheel studs and lug nuts with both left hand disc brake wheel studs and right hand disc brake wheel studs if you are still looking. Take one of your rotors and lay it on the back side of the hub and you will see that you need to press the wheel stud in place and no the disc brake wheel studs are not swedged. there is also a picture of the wheel studs and lug nuts.
Bob
