Spare tire cover
Here's a photo of what it looks like when you have the wide wheels. If you don't, it doesn't have the oddball cut-out on the forward edge, it just goes straight across. The dimensions are 30" wide with square corners on the front. The rear corners are not square, but, a slight "V" shape. The edges measure 24 3/8" front to back and 25 1/4" in the center (before you cut out the notch). The rectangle by the trunk latch measures 7" X 1 3/4" centered in rear edge of the panel. The hold down hole in the center is 3" in diameter, 11 1/4" from the front edge to the center, and 14" from the rear edge (there again, without the notch cut out yet) to the center. It's also centered in the middle side to side with 15" from both edges to the center of the hole.
Here's a photo of what it looks like when you have the wide wheels. If you don't, it doesn't have the oddball cut-out on the forward edge, it just goes straight across. The dimensions are 30" wide with square corners on the front. The rear corners are not square, but, a slight "V" shape. The edges measure 24 3/8" front to back and 25 1/4" in the center (before you cut out the notch). The rectangle by the trunk latch measures 7" X 1 3/4" centered in rear edge of the panel. The hold down hole in the center is 3" in diameter, 11 1/4" from the front edge to the center, and 14" from the rear edge (there again, without the notch cut out yet) to the center. It's also centered in the middle side to side with 15" from both edges to the center of the hole.
