Accusump installed on B motor

-

Mrpatel

512Dart
Joined
Nov 8, 2007
Messages
488
Reaction score
105
Location
Niagara, Ontario
I thought I would share a few pics for future reference for other members. I used Riv nuts in the inner fender well to mount the band clamps and Aeroquip fittings. It’s a 2 quart system. Note; I have a Victor intake on and I have the rear of the hood kicked up about half an inch. Andrew

8D80DE4A-3EB1-4B53-A5C8-449BF2C7A8B4.jpeg


51E051FA-5089-47DA-9F21-4BDB4B9E3501.jpeg


04BCD4BB-ACA8-4BE8-99E3-AE90FA78394A.jpeg
 
Cool. I did one on an E body, and put it into the fenderwell so it wasn't visible.
 
these can also be run "open" to provide some protection and during high G loads, just remember to charge it and close the valve before shutting down to use the pre lube option, we ran one in conjuction with a weaver dry sump system on our road race car, it takes the pressure spikes out
 
-
Back
Top