Crank breakers wanted

Yes Pittsburg! I was collecting parts to build a stroker many years ago and my brother was supplying me the parts over a series of years as I had a growing family and would only buy parts as I had some spare cash. I did not even have the car to put it in. Well my brother likes to build things like a tight arse and said you only need a cast crank as they are good for about 450 HP. He sold me an eagle crank. Speedmaster chev pistons and rods etc. Well when I pulled it down I could see that the valves had been kissing the pistons, the valve reliefs are in the wrong spot for a mopar even though he knows everything , so I spat the dummy and put forged srp pistons in and scat rods and built it myself and have even put trick flow heads on it and it makes 425 RWHP now ( about 550 at the crank!)He originally told me it would only do mid 13s in the qtr but it has already run a 11.5 qtr and am looking forward to going to the track now and see if it runs low elevens and if it does an eleven flat I will never go back to the track again as it is a joy to drive now and behaves perfect in stop start traffic!