No ACL and less than 400 hp, sell me on a clutch
You can find the bell alignment procedure in your service manual. A download link is added below if you need one.
MyMopar - Mopar Forums & Information - Service Manuals
Finger height is the dimension as installed (1.700") per MP. They provide fixture diagram but no real info on "how to".
I use a 10" disc that I had ground. The disc is sandwiched between the PP and FW to simulate an installed flat .310" thick disc. I measure from next to the fingers to that disc with my depth mic. I'd imagine this could also be accomplished just using 5/16" key stock lengths as well.
You can find the bell alignment procedure in your service manual. A download link is added below if you need one.
MyMopar - Mopar Forums & Information - Service Manuals
Finger height is the dimension as installed (1.700") per MP. They provide fixture diagram but no real info on "how to".
I use a 10" disc that I had ground. The disc is sandwiched between the PP and FW to simulate an installed flat .310" thick disc. I measure from next to the fingers to that disc with my depth mic. I'd imagine this could also be accomplished just using 5/16" key stock lengths as well.
