69 Cuda Restoration

-
Nice, Did you have a new Plymouth nameplate installed near the drivers side hood stripe ?
The car was repainted before I bought it in 91 due to a previous accident. They painted all the stripes on the car. They were not all present or in the correct locations but I did what I could to make them look correct. Is the stripe not located correctly on the Plymouth nameplate ?
 
The car was repainted before I bought it in 91 due to a previous accident. They painted all the stripes on the car. They were not all present or in the correct locations but I did what I could to make them look correct. Is the stripe not located correctly on the Plymouth nameplate ?
The nameplate seems too far to the right (facing the car). The stripe appears good.

001 (1).jpg
 
20200906_144721.jpg
20200906_093403.jpg
20200911_142521.jpg
20200911_142538.jpg

Got around to buttoning up the Fuel system, brake lines, and some other misc stuff. First time outside with the drivetrain in the car, need to pick the front up but want to see how it sits with a full tank first.
 
This thread is a perfect example of "Craftsmanship " and " pride " in your work !!!!!! Beautiful car !
 
This thread is a perfect example of "Craftsmanship " and " pride " in your work !!!!!! Beautiful car !
Thank you! A lot of time invested in restoring the car, I honestly cannot wait to drive it.
 
BEAUTIFUL <3 bring it to the Big Easy MOPAR show Saturday March 13th 2021
The Grilles aren't finished yet, but hopefully trying to shoot for Carlisle this year.

VERY nice work!! It reminds me of the 67 I had back in the 80's
View attachment 1715655122
Do you have the fender tag for the car?
Thank you, yes I do. I want to have it reproduced and painted though to install.

Very nice, is that bat ground "tight"?

That picture makes it look tight, I redjusted the battery in the tray as well since taking that picture. With the car running and reving up there is plenty of slack in it.
 
The TTI's and 3" X pipe exhaust are hard to capture on the phone
 
Beautiful, now summer can come...

Still waiting for Instrument specialties to start on my grilles, then once they're done I'm going to have them shoot the header panel/ valance/ hood over for me. I was hoping they were going to be finished this past fall, but as of a few days ago they still have yet to touch them. So this summer might be out of the question.
 
-
Back
Top