P S T grease?

512Stroker said
Well I will order some of the Hotchis grease.
I pressed the LCA bushings in today
I guess it went together all right, the shafts went in a little tighter into bushing than I thought they should as they are suppose to slip inside the bushing during normal operation.
I'll find out when I get it back on the road.
Click to expand...

The pivot shafts should be tight in the bushings. They shouldn't require a full on press fit, but you want them to be a very tight slip fit. Difficult to assemble by hand, especially if you haven't lubricated the crap out of them. If they aren't that tight you end up with slop in the LCA.