Stop in for a cup of coffee

The ford rims i put on the Barracuda had a similar problem. Flapwheel in the die grinder and it took just a touch to get them to fit. A couple rounds with the flapwheel inside the wheel will do it. Use a sharpie and mark the area you need to tune up. Buff til color from sharpie is gone. Probably 2 or three repeats and its done. Or,test fit wheel, snug, remove and grind away the scarred part that the hub created.

fitting parts like a machinist does is marking compound, test fit, and remove offending material and add marking compound and repeat until there are no marks. Just dont go all heavy handed.