Stop in for a cup of coffee

MomsDuster said

Good Morning folks, short work day today. Property management doing the annual walkthrough of this dump. Then off to UPS to ship package to Leanna. May even look for the courage to start cutting this hood. Going to be a beautiful weekend so I’ll need to get a cruise in also.

Click to expand...

Mark,

Tape string from fender to fender fore and aft of the tunnel ram. Then do the same front to back on each side of the tunnel ram. Then you have a grid work. Transfer those measurements onto the hood. This is easiest when intake is just set in place for mock up. Intake can then be taken off, lay hood on and use the grid work. Just remember the opening will likely need to be trimmed out front a few times to clear the scoop/stacks as the hood opens on an arc.