17" Bullit center caps
Well, here is what you get from ARE, AR 167 for about $168.00, that's with shipping and tax. Ordered mine through Hughes Engine. They are a little pricey, but they are very nice . Extra o-rings come with the set of four. I had to.smear a little silicone grease on the o-ring to get it in. This cap is around 7/8"" thick, the back side is machined out, should clear your dust cap on the fronts. Having said that, my car has 3/8" spacers on the front because of the interference between the ball joints and tie rod end. I will have to dismount my rear wheels and tires, the rear wheels are a different yr and backset, so need to get the hub machined to match the fronts. So it got a little expensive, these wheels were on the car when I bought it, and I liked them. They would look really nice if a guy could get the Mopar Mega M or Dodge lasered in. If I were starting from scratch, I don't know if I would have gone this way.
Pictures, both wheels
Well, here is what you get from ARE, AR 167 for about $168.00, that's with shipping and tax. Ordered mine through Hughes Engine. They are a little pricey, but they are very nice . Extra o-rings come with the set of four. I had to.smear a little silicone grease on the o-ring to get it in. This cap is around 7/8"" thick, the back side is machined out, should clear your dust cap on the fronts. Having said that, my car has 3/8" spacers on the front because of the interference between the ball joints and tie rod end. I will have to dismount my rear wheels and tires, the rear wheels are a different yr and backset, so need to get the hub machined to match the fronts. So it got a little expensive, these wheels were on the car when I bought it, and I liked them. They would look really nice if a guy could get the Mopar Mega M or Dodge lasered in. If I were starting from scratch, I don't know if I would have gone this way.
Pictures, both wheels
