Okay, ported R/T heads, too. I take it that you informed the comp tech about your 1.6:1 rocker ratio during your communication. The opening and closing events do indicate 114 LSA and the lift numbers show that it is a custom cam when compared to the XE274-HR grind. But looking at it compared to what I have experienced in a 4 inch stroke small block (Comp XE274H, 110LSA, 11.4:1, Intake Closes 60 degree ABDC) I would go for that cam. Just curious, who ported the heads and do you have any head flow information and how much lift are they set up to safely run?
