Anybody make a homemade exhaust flame thrower?

MY TIME TO SHINE.

(this works best without muffler so that all of the flammable exhaust gasses have the best chance of igniting with the fuel.) *also will come out with more speed bc of the lessened restriction. that means bigger flames.

Materials:
1. butane torch or some sort of bbq lighter.(this is alternate flamethrower)
2. spark plug (short section of spark plug wire w/boot)
3. some wire.(to run to battery)
4. a 1gal fuel cell.(not plastic, plastic melts)
5. some fuel line (hard line whatever size you want depending on ho big the flame you want)
6. a switch of some kind
7. clickety clack fuel pump


How to:
1. drill hole in exhaust for spark plug to rest.
2. give power to spark plug with wiring to battery or coil/power source big enough to get solid spark.
3. mount fuel cell away from heat and flames
4. run the hard line to exhaust behind where spark plug is so that the exhaust can "mist" the gas instead of it coming out in a stream
5. get your switch and splice in wiring somewhere so you can turn flame on and off.
6. wire in clickety clack fuel pump and add that into switch wiring.
7(alt.) easier way to do this is to get your bbq lighter or butane torch and have a buddy hold it behind the car to light the misted gas on fire. (if your buddies don't have eyebrows already)