Boy, ordered my parts this morning and ended up way under budget!!!!! Can't wait to get this screamer together!!!!!!
1st the cam....
Summit Racing SUM-6900 Summit Racing® Classic Camshafts | Summit Racing
Lifters....
Rhoads Lifters 2018 Rhoads Original Hydraulic Flat Tappet Lifters | Summit Racing
carb.... 400 2bbl on the 360 2bbl intake will have more low end crunch than a 408 from off idle, especially with the cam advanced 4* and the Rhoads lifters
Uremco 6-6139 UREMCO Remanufactured Carburetors | Summit Racing
I'll use the 302 heads on DT, and with my port job I'm hoping they flow around 240 @ .450 lift. Even though they are closed chamber, I'll use some of all the left over money to mill an additional .050 and hopefully that puts me at 9.8 to 1 with Fel Pro 1008 gasket.
Oh! I plan to dremel the divider out of the plenum of the 360 intake making it more of a single plane. That intake should flow what the heads will flow then.
:thumbsup:
Scream'n 318
