raddodge
Member
hi all is anyone still making the boots for a hurst v gate shifter seems can only find old ones and 350 to 500 us is way over the top cheers
hurst v gate shifter boot
- Thread starter raddodge
- Start date
-
Well if you find out how to buy one at a reasonable price. Please let me know. I have a A body complete Vert-gate shifter but I also need a boot.
raddodge
Member
will do
j par
Well-hung Member
I just used one of the big generic square hurst boots and cut a small hole for the reverse lever to come out...
raddodge
Member
ya i did that too but where my tunnel is on my 63 it binds a bit and hard to get into 2nd and 4th take it off shifts good
j par
Well-hung Member
I had to cut tunnel under boot...
dicksmidlac
Well-Known Member
Those original v gate boots are way too big to use on an a body.Nowhere to screw the retainer trim ring to at the back.
dodgedifferent2
Well-Known Member
Make your own.
I got some material and had the wife sew one up. She is not overly satisfied with it at the moment and wants to redo it some day.
I got some material and had the wife sew one up. She is not overly satisfied with it at the moment and wants to redo it some day.
Daves69
Well-Known Member
Not "square" but not enough either.....
Super Shifter Boot Mr. Gasket 9649 - Large 9" x 8" with Chrome Trim NEW | eBay
Lol, This kinda' covers the hole for now. I'm thinking it can be used to pattern off of (if I ever get to it)......
It's too short and really could use 2-3 more folds to work right. Even as is, it hangs over stock 4 speed tunnel..........
raddodge
Member
Ya mines the same if i can find one im gonna make a mold of it and make my own from silicone rubber have evrything to do it just need a starting point to measure up and machine up a mold
Well when you do, I'll buy one.
raddodge
Member
Will keep ya posted have one curing at the moment of my own design with a wood mold but prefer a ali mold bolted together. well see how it fits remade my 63 tail lights came out ok
j par
Well-hung Member
-
