1969 Dodge Dart Swinger clean up
My rear axle seal remover.
Pulled into place on the inside.
Steel bar through housing.
And a couple hits pops the seal out.
Housing suspended on a length of 1 1/4" conduit.
Love my old Wagner electric gun. This thing is over 30 years old.
Two coats of the same Semi-gloss mix that I used on the K frame.
Pressing in new front bushings on the leaf springs. 1-11/16 or 1-3/4" sockets work perfect for this.
Coating the leafs with Boeshield T-9 to restore a factoryish bare steel look and protect them from rusting.
T-9 on the left, clean steel on the right.
All leafs coated in T-9 and soaking in.
My rear axle seal remover.
Pulled into place on the inside.
Steel bar through housing.
And a couple hits pops the seal out.
Housing suspended on a length of 1 1/4" conduit.
Love my old Wagner electric gun. This thing is over 30 years old.
Two coats of the same Semi-gloss mix that I used on the K frame.
Pressing in new front bushings on the leaf springs. 1-11/16 or 1-3/4" sockets work perfect for this.
Coating the leafs with Boeshield T-9 to restore a factoryish bare steel look and protect them from rusting.
T-9 on the left, clean steel on the right.
All leafs coated in T-9 and soaking in.
