Small block heads with no casting numbers

Well right now the plan for this engine looks something like this. Im gonna pull the oil pan see what the bearings look like. Degree the cam see what the heck it is. Try and figure out exactly what the lifters are and what the deal with the rockers and pushrods are. If the bottom end checks out ok I will put a new a new oil pump and water pump on it. Port the heads get a good valve job maybe even open the up too 2.02. Throw on the edlebrock intake @67/6barracuda sent me and the engine for the cuda will be done! Just gotta find a trans and converter although I have a extra 904 lockup trans but it need completely rebuilt it didn't have 2nd gear when it was pulled.