Wake up a 1968 318...
Thank you to all for the advice, wound up doing a full rebuild on the 318. Here's what we put in there.
Summit 600cfm electronic choke that I had NIB laying around.
Edelbrock Performer manifold
Indy 318 heads with beehive springs from them, hardened seats etc. (wanted LAX, but they don't have them anymore)
Comp Cams CL20--210-2 Cam
Comp Cams Magnum double roller timing set
Melling oil pump
Summit Block Hugger headers
eBay bs HEI distributor
Tuff Stuff 130amp alt
Turns over with 40psi, is tight as a dang drum, and makes me REALLY happy. Getting exhaust as we speak and then time to tune.
Also did a Scarebird front disc conversion and converted the master cylinder to a Dakota unit.
Thank you to all for the advice, wound up doing a full rebuild on the 318. Here's what we put in there.
Summit 600cfm electronic choke that I had NIB laying around.
Edelbrock Performer manifold
Indy 318 heads with beehive springs from them, hardened seats etc. (wanted LAX, but they don't have them anymore)
Comp Cams CL20--210-2 Cam
Comp Cams Magnum double roller timing set
Melling oil pump
Summit Block Hugger headers
eBay bs HEI distributor
Tuff Stuff 130amp alt
Turns over with 40psi, is tight as a dang drum, and makes me REALLY happy. Getting exhaust as we speak and then time to tune.
Also did a Scarebird front disc conversion and converted the master cylinder to a Dakota unit.
