MSD 6AL Wiring

67Dart273 said
Rule of thumb is "same size as there." 16 or 14 would be fine. There is less load using an MSD because the ignition wire just becomes a "trigger" (small red to the MSD)

Make SURE with your MSD that you connect ONLY the MSD wires to the coil. No tach, and no radio capacitor

If you are using a magnetic trigger dist. Make sure the "rotor phasing" is correct

Okay good to know, I"ll grab some 16 ga wire! But yes, the orange(+) and black(-) from box will be the only thing on the coil. I have a mopar distrubutor, so by phasing you do mean that the green(-) from from box goes to to black(-) on dist and violet(+) goes to orange(+) on dist, correct?