my slant buildup

comments anyone? Sorry for the long read. is longer already than I thought, and havent really even gotten into the "parts bought for this engine" yet.... Am I close? Way off base? Nuts? (maybe I don't wanna hear that part of the answer) Familiar to those who have "been here"?

other parts I have here so far...
Found a set of NOS forged crank rods from back in the day since I had NONE (this IS a 74 engine I am building) from a guy on the /6 forum (1st met via Ebay, missed out on the set he had listed, Emailed to see if he had more) cheaper than I could have had a set of used ones rebuilt.... $105 shipped....

Engine Tech pistons from Rock Auto stock type in 20-over.... $80/set (paperwork in box says they are really Silv-o-lite brand)
rings Moly coated from jegs (only place I could find 20-0ver rings at the time) $30.
Cloyes/Melling cam sprocket, old MP from back in the day from Ebay, double roller.... $34.
Melling D.R. chain from Rock auto $16. Melling D R. crank sprocket (last one they had at the time!) $25.
Cam regrind with fuel pump lobe repair.... oregon cams $120. (plus shipping)
SI oversize valves (oregon cams) $145.
new solid lifters (oregon cams) $72.
block and crank work (NEWCO perf., Kentland IN) $425 Bored, milled deck 0,030", sent block out for shot peen, magnaflux, baked clean, polished crank, installed cam bearings and freeze plugs, and maybe more.
Head work as yet unknown$$, up front estimate $3-400. finish porting, new guides, seats and fit OS valves as needed. In progress now.
most of an engine, incl a super 6 stack, ICH swap "2020" $125.
cam bearings Rock Auto $15./set
rod/main bearings Ebay TRW from "back in the day" $50.
damper rebuilt "Damper Dudes" $85.
pile o' parts #1 from FABO $250 FlowKooler water pump, new but VERY OLD STOCK Melling oil pump overhaul kit, a pile of fel pro head gaskets (like 8 of em pre-print o seal) , more misc.
pile o' parts #2 from FABO, 318 valve springs, retainers, and hardware, to be used with my OS valves incl a nice set of 318 valves that will get used elsewhere, (cant remember exactly, think it was around $60....
NOS Carter BBD from /6.org member. $250.
2 peanut heads from guy I got 1st super 6 stack from, $50, these are in machine shop right now (hopefully not FUBAR from over-grinding/porting, this part of build completely experimental but Im hopeful)
$140 fresh peanut head from CL, plus misc box of head hardware... rockers, extra valves, springs, etc.... "future consideration"
this head freshly redone, new bronze guides, etc.... 30 yo machine work hopefully done "with pride" and "done right".
$55 pan and VC gaskets from "REAL GASKETS" in Tennessee-- silicone material. hopefully lives up to their name, only ones I will ever have to buy.... hopefully.