Hi 65DartCharger, I understand the terminology you were using above. I have tried several different combinations of loosening the regulator bolts, U-bracket rail bolts and the large front rail nut.
If you look close at the picture showing the regulator bolts, you can see that the large front rail nut is as far forward as it can go. The front rail is what seems to control the front to back placement of the window. Now the front rail has a bend that goes to the front of the car that I believe is suppose to push the bottom of the window towards the front of the car more quickly during the last inch or two of travel upwards.
Is there any way to determine if my regulator arms may be bent? It like the front arm of the regulator is bend down a little which prevent the window from engaging the bend at the top of the front rail. My thoughts are to find someone that has a rear quarter regulator out of the car and could take a picture of it for me.
I really appreciate your help!
Teratech
