dartcuda1
67 Barracuda 500ci 6sp
Anyone know of a fabrication shop in or near Pennsylvania
I need a firewall put between the trunk compartment and the passenger compartment of a 67 barracuda fastbackWhat type of fab are you looking to have done?
problem is easier said than done I'm no good at that I tried. I'd rather pay someone and just have it doneGet a sheet on tin or aluminum and cut it too fit. Do a cardboard cut out of it first. Then trace it on to ur metal. Kim
s&w race cars is right up the street from me and I've been trying to get my car in there for 2 yearsI think S&W Race cars is in PA. Close to Philly.
............ Do a cardboard cut out of it first. Then trace it on to ur metal............... Kim
I understand what you're saying been through that frustration went through the roof because it's not my forte it'll be easier faster to pay somebody and have it done in a day than me taking the year to do itThis!!! Cardboard is cheap, you can make a 100 pieces of scrap and not cost much more than your time and the added benefit is you will learn something and that is the core of Hot Rodding........