Looking for fuel line advice for stock magnum EFI and fuel pump

Truckie said
I’m getting close to firing up my son’s 360 magnum in his 67 Dart. I’m using the stock EFI and I installed the fuel pump from the donor truck in the fuel tank. Any suggestions on what I should do for fuel line? Anyone have a source for stock connectors? Do I run steel line part way like it was on the donor truck or rubber the whole way. Any help is appreciated. Hoping to hear it run this weekend. The May 16th graduation deadline to have the car done is fast approaching and I still have lots to do.

Whatever you decide needs to be high pressure line, but I’m not sure I would use rubber even then.
I used 3/8 nylon 12 high pressure line even though I don’t run efi.
This is what I used for my supply and return both and has a 530 psi working capability and a 1,200 lb. burst rating.
It may seem like over kill, but for the cost and ease of routing it served the purpose well.
In my own opinion stainless steel line is always best, but...
JEGS 159235: Nylon Fuel Injection Hose 3/8" O.D. x 10" | JEGS