Pro Flo 4 Timing

Mopar73340 said

If you end up going this route please take pictures and post here. I have had this issue and even discussed with Edelbrock tech support a couple years ago but have not got around to messing with the distributor. In my case anything over 28* seems to cause issues. We should be able to run mid 30’s with some vacuum advance thrown in without issue.

BAC, thanks for your efforts and posting your fix.

Click to expand...

I will. I've got less than 50 miles of time on the system, breaking in a new motor. But I have some issues start/cold idle that requires throttle. I've been leaning towards a bad TPS, it floats around from 0-2%, and anything above 1% disables the idle speed motor.

Peter mentioned that his idle/start issues cleared up with less initial timing, so I've told another possible cause to investigate.

I'm going to try a new TPS and redo the idle tuning. If I still have an issue I'll dig deeper.