Fabrication shop

-
oldkimmer said:
Get a sheet on tin or aluminum and cut it too fit. Do a cardboard cut out of it first. Then trace it on to ur metal. Kim
Click to expand...
problem is easier said than done I'm no good at that I tried. I'd rather pay someone and just have it done
 
I think S&W Race cars is in PA. Close to Philly.
 
STR Chassis / Tory Shellhamer in Lebanon PA. He makes a nice tube K set up for A bodies also
 
oldkimmer said:
............ Do a cardboard cut out of it first. Then trace it on to ur metal............... Kim
Click to expand...

This!!! Cardboard is cheap, you can make a 100 pieces of scrap and not cost much more than your time and the added benefit is you will learn something and that is the core of Hot Rodding........
 
JBurch said:
This!!! Cardboard is cheap, you can make a 100 pieces of scrap and not cost much more than your time and the added benefit is you will learn something and that is the core of Hot Rodding........
Click to expand...
I understand what you're saying been through that frustration went through the roof because it's not my forte it'll be easier faster to pay somebody and have it done in a day than me taking the year to do it
 
Last edited:
You must log in or register to reply here.
-

Back
Top