Manual Steering Box Assembly Question

-
ChrisRomello

ChrisRomello

Well-Known Member
Joined
Apr 7, 2017
Messages
559
Reaction score
738
Location
Cocoa, Florida
Hello all,
I took the steering box for my ‘65 Valiant apart to check the condition of the inside but I think I put it back together wrong. To specify, I believe I didn’t align the gears properly so I think this is now causing an issue with my pitman arm. Would someone be able to describe to me the proper way to assemble the gears into the box? Thanks!
 
If it is a standard box it should take a little more than 5. You have done the impossible. Take the top off the pinion shaft and lift the drive pinion up and turn the imput shaft till the pinion shaft is in the middle of the worm gear.
 
SGBARRACUDA said:
If it is a standard box it should take a little more than 5. You have done the impossible. Take the top off the pinion shaft and lift the drive pinion up and turn the imput shaft till the pinion shaft is in the middle of the worm gear.
Click to expand...
I will try that first thing tomorrow!
 
You must log in or register to reply here.
-

Back
Top