Barracuda Gas Tank Removal

Try putting it back in without taking the screw out of the filler flange. It wont happen. The tube cannot line up with the flange bolted up as the tank cant get into position because of the spare tire well.
I found that it says to remove the 5 screws under the carpet but thats a huge undertaking. I just removed the 3 screws of the flange, pulled the vent tube off the filler pipe and rotated it so you can pull it out of the tank area as much as possible, then you can just catch the fill pipe in the tank grommet and hang the tank loosely. you can now turn the fill pipe and push it into the tank grommet. Its pretty easy to slide in with some grease on the pipe. Then line up the filler flange, tighten and then you can wrestle the vent line back onto the spud. It took me 10 minutes to drop the tank but 60 wrestling the new one up and in.