1965 dart street/strip build turbo hemi

-
Kudos....this is an outstanding build. I'm looking forward to how you complete the steering shaft / firewall and the brake master cylinder location modification. I shy away from the Gen III application of the early A because it requires your skills. It is not a simple unbolt the old, drill a couple of holes, and bolt in the new install. Great job!!
 
Kudos....this is an outstanding build. I'm looking forward to how you complete the steering shaft / firewall and the brake master cylinder location modification. I shy away from the Gen III application of the early A because it requires your skills. It is not a simple unbolt the old, drill a couple of holes, and bolt in the new install. Great job!!

Thank you. The column I have fitted all ready. I am using a drag style column to give me some extra room. The master cylinder will be moved inside using a Wilwood reverse mounted setup. This is my first build and I am learning quickly or how tight things get lol.
 
Made a little bit more progress on the dart. Started building my transmission tunnel. I have never done this. I use bent rods to get a shape and height. The first piece I bent. But came to realize I am not smart enough to figure out how to bend the Bellhousing part. O well cut and weld... FYI the extra hang over on the floor will be trimmed, bent, and then welded to the tunnel from the underside as well. Little by little this project moves on.

View attachment 1715594824

View attachment 1715594825

View attachment 1715594826

79F0A72F-1BDF-4058-93FA-7A167EF1D73E.jpeg


16114723-EB0A-4B9B-A288-DE8A48A9723A.jpeg


EAE94A7C-4A52-4F6C-9567-C9C261704726.jpeg
 
Thanks everyone that has liked my pictures or commented on my post. I am super stoked on it so far. I added another piece tonight. I know it may seem to big for other’s but the hole is larger due to me centering my engine and drivetrain. Being a early A body it has a much smaller transmission tunnel. I would have been better off building all new floors but I have never done that and felt this would be something that I can do. First true project build right here. Things can only get better as I move along with it. Learn as I go. I am nothing more then a modern Hot Rodder.

97D12D5C-53EF-48BC-953B-BADD876FDD59.jpeg


View attachment 1715595530
 
Haven’t updated this is while. Wanted to share a few things. Got the transmission tunnel near done. Well the front half of it. I plan on doing the rear half once I get my rear suspension and axle in place. I started closing off the firewall. I received my in cab mounted pedal assembly. I will order the seats at the first of the year and then the car is off to the chassis shop to get the cage done. While it is there he is going to mount both seats, my overhanging pedals, and steering column. It will all be fitted to me. I can’t wait.

E9E4EAE4-B7EF-4098-B5E6-9D002BC7823A.jpeg


E0F92781-EBC5-456E-8057-1026EB5B478A.png


08871E0C-7D03-45AE-A91B-90AE0679AF62.jpeg
 
Firewall is now closed off. Now to finish the front half of the transmission tunnel. Then get the engine and transmission back in. Then off to get its 8.50 cage done. Along with mounting the foot pedals, seats, and steering column. So much to finish before February. Pictures are before and after.

FE3D8184-2CD7-41FC-955D-B703E20AFA3A.jpeg


5DD1B388-30AE-43A8-A422-329FD81A5310.jpeg
 
Last edited:
Looks great! How do you plan on routing the front pass side brake line? I only ask because I smoothed out the firewall on my 66 and cut off the tabs for that brake line in the process. I wish I hadn't. I spent a few hours today building a front brake line and re-welding a tab to hold it. LOL
 
Looks great! How do you plan on routing the front pass side brake line? I only ask because I smoothed out the firewall on my 66 and cut off the tabs for that brake line in the process. I wish I hadn't. I spent a few hours today building a front brake line and re-welding a tab to hold it. LOL
All will be in side the car now. Using bulk head fittings to pass through the firewall
 
I have finally installed my engine and transmission. I fully welded my front half of my transmission tunnel. I learned of a ear on the transmission that somehow I missed while mocking everything before I built my tunnel. I had to modify it slightly. It is in and solid. I will make the top half removable once I get my car back from getting its cage built. Little by little I will get it done.

6A99DAF1-D01F-49C5-AE17-1AAFF782D0BA.jpeg


1052DA05-1C8A-4DBA-920F-0A33E76F8AA2.jpeg


BB344147-1FC2-45BD-85AB-80EA41158E96.jpeg


F1AD97DF-2F92-4C3D-9275-B86010AE98E8.jpeg


8AE081CE-0040-4EF1-92C9-A83E11619413.jpeg
 
Car is on the ground. It is ready to get its roll cage. February can’t get here soon enough. Wish my seats would show up lol.

3C2C7F3D-B7B5-40A0-9093-AECFAD719650.jpeg


C8F8AD09-CACA-4F47-9C20-6AA181488E66.jpeg


DB60EBAE-17E7-4B19-AEF4-CC0E105F95E3.jpeg


6A7A7AA8-EA3D-4606-ACC9-E06ADDA5E4D8.jpeg


59205E33-95B6-4EDE-A8CC-F5C56B4ADB09.jpeg
 
Parts are slowly coming in. Got one seat today. The other is coming Monday and the cover on Tuesday. Then the car is off to get its 8.50 cage done. I am getting excited.

1386FD08-8C53-42C3-BA35-96A7C818415E.jpeg


00EEC661-4415-4CC0-B207-C6E0AEE8D277.jpeg
 
The weather here in Utah has delayed me from being able to drop the car off to get the cage completed. I will have it one more week. So sense I got both of my seats I decided to mock then up just to see how it is all going to fit. I decided I will continue with building my transmission tunnel.

912061B0-29C8-402D-8481-D3898305C423.jpeg


F36CC275-F6B3-4792-B431-5728C85084D9.jpeg


092D7C04-20EB-4EED-AA7D-69B86F3478E9.jpeg


6B9D0D75-BFE7-4254-B30B-0C6A43D98216.jpeg


F393E220-9FA8-47D4-AA92-5C32FA4DFD5E.jpeg


E57E808C-2657-4E16-A2F6-DDDFF80E9DAE.jpeg
 
Last edited:
Dude, what a sweet project! I was gonna suggest a bolt or dzus in tunnel but then kept reading and you beat me to it. Seeing how tight that motor fits in there confirms that I indeed wussed out and hit the easy button with my LS Dart. Can't wait to see this thing slaying some tires!
 
Only got to spend a hr or so in the shop tonight. I was able to bend some more of my transmission tunnel. Next weekend I hope to fit it and weld all of it in place.

60592B0F-13B2-4671-9DA9-3234E68E6D4E.jpeg


A6AA9268-56F7-4204-921B-7FE163231469.jpeg
 
Made a little more progress on the car. I ran out of welding gas and had to call it a night. I am learning that making a floor pan may have been easier lol. It’s not finished but here is where I had to end the night. Not bad for some young hot rodder from just learning from seeing other people do it.

AA456F33-A8FD-48DE-846B-158B64141219.jpeg


37890345-A365-44BB-B29F-527880694766.jpeg


D529E9A3-03AB-468E-A877-33F68BF60A5C.jpeg


5384C6B4-05F8-4F51-AA7A-751F61D0236D.jpeg
 
Car goes in tomorrow to have its cage, seats, steering column, and pedal assembly mounted. I finished up the transmission tunnel today. I can not wait.

F400A1E4-8C8B-4010-9FDD-CF4FDC05F2CD.jpeg


E91233D8-B75D-4EB0-974E-CA9884BF0DF6.jpeg


441AE85B-CE1B-478E-B0AA-825038448662.jpeg


EDA48813-EE73-47D5-950D-D34811EB2CF9.jpeg
 
Last edited:
Been a awhile sense my last update. Well the builder has sent me the first pictures of my cage and I wanted to share it. I can’t wait to get my car back lol

21452B81-31EF-45A1-8CE4-FE7485473C5C.jpeg


D11FCC1C-3B2E-43DA-8F9B-CA4013B515F7.jpeg


6016A776-A656-4E16-B560-65C3208695FC.jpeg


9C1C1351-9856-4238-8EC5-4E7C8636FEEF.jpeg


123075F9-1ECC-4110-8F67-E15228D1F9DF.jpeg


F2F7031F-CC88-4B4F-9D47-66B7A1210A7A.jpeg


8B4595C6-75CD-4DBE-A082-51C0BBE46EE1.jpeg
 
Some new pictures of my roll cage. I can’t wait to get my car back and see it all completed.

E0B70B93-B154-4111-BE4B-7C7778D06D3D.jpeg


38CEE1B2-059D-42AD-AD47-8C6313318A08.jpeg


08E47F17-C74A-4D09-A60D-28CCAC1BD1DD.jpeg


64144246-7D9F-47DB-8CDA-7CC00E19DAC1.jpeg


220130ED-3945-42FF-B3EB-407662A1D98C.jpeg
 
Do you plan on mini-tubbing it?
Yes. I didn’t have enough time to get it done. The car was scheduled to go to shop for its cage work. We measured it out and place the bars. I will do it once I receive the car back. It may be a little tougher now lol.
 
-
Back
Top