72 Dart with spool mount K Frame

Yes there is a definite possibility of something being bent, the torsion bars are adjusted ok, ride height is good. He got older QA1 upper and lower control arms, and strut rods. But he didn't get the QA1 k frame. According to the printout he got, it has -1 degree camber on both sides, and 4 degrees positive camber. Mostly a street car, some drag racing now. The alignment tech told him he couldn't get any more camber on the drivers side, so he equaled the camber. Moog used to make offset upper control arm bushings for the factory control arms that I have used before. I would recommend them if he didn't change the arms. I thought possibly the track width is slightly wider with the spool mount k frame, and the QA1 lower control arms might need to be shortened for camber. But the QA1 arms are not rubbing the frame like the factory ones. He is happy with it now, I would like it better, but if he is happy, good for him. Thank you all for the replies.