Last go Racing! Getting a 1965 Barracuda ready for the track

Cool, it looks like you’re having fun and that is a great looking car. I’m usually not a fan of the cut out wheel wells out back on these cars but you did a damn good job and they look really nice with the front trim installed. Too many people just hack them open and don’t put any trim on them cause they never made any that will fit but have seen a few like what you did, good job!

Thanks, Its really hacked but the 1/4s are real bad with old repairs and such. I'll do them a little nicer later. The idea for using the molding was simple. I had a couple extra. I put them in place and started cutting.
Can't wait to see the tires on it and back on the ground. I have 255/60 15's going on the back for now. Little bigger then the mock up tires. I think it will look good.

Cool Car!!! FYI : be careful with the shifter adjustment I lost a trans at the Bracket Finals a few years ago due to an out of adjustment shifter, after a rush trans installation job.
I agree, I'm going to try this new cable. If it doesn't feel right to me the shifter will be going.