The newest "building a slant six" thread

Not looking for serious HP here, low end torque is a very good thing, probably will never see the north side of 4k, and even then only when passing on Saddle road. I got a two barrel manifold coming, have a 38 Weber. got a 225 /6 that is bone stock. I will have to look at what year again to remember, early 70s I think, could be older. I just want to do the old tried and true thing- intake manifold, exhaust, cam. I don't want to grind on heads, put a lot of money into building the snot out of this thing. The 225 replacing the 170 alone will help a lot! I have an auto transmission and it is going into my wife's 68 Dart four door. The main mods to the car will be this motor, AC and good brakes. After that, it is done and ready just for transportation in style around the island. So I am just looking for a good slam it in and go cam, and if it is worth it to buy some headers or go with the Rustyratrod just open up the stock manifold and go 2-1/4 exhaust. Looking through all the cam discussion really didn't answer my question on my particular build.