[WANTED] Large Castle Nuts

-
Status
Not open for further replies.

coalman

Well-Known Member
Joined
Aug 6, 2015
Messages
1,223
Reaction score
135
Location
Texas
Rating - 100%
2   0   0
Contact seller
I need at least one castle nut for the 2-10-61 shaft package lower control arm p/n 2275 461 1966 Dart. This is the shaft on the front side where the torsion bar goes. Thanks
 
I prefer my hardware to be original so I use the 3 prong castle nuts used in 1965. I have a bunch for pretty much any of the suspension components and all have been finished in the OEM black phosphate. Let me know if you are interested
Din
 
I prefer my hardware to be original so I use the 3 prong castle nuts used in 1965. I have a bunch for pretty much any of the suspension components and all have been finished in the OEM black phosphate. Let me know if you are interested
Din

My 66 has the 3 prongs also, all I have to is get the thing off, as it is rounded. I am interested in two, do you want to PM me? Thanks
 
Here you go - some loose ones and some threaded on a couple of shafts. I misspoke when I said they were all black phosphate coated - the 2 on the far right are not done. When J get enough of all types to send out, then out they go. You said something about the shafts, so I included pics as well
Don
6EC52A01-EF0B-40A2-817A-6F56A3EC8EE2.jpeg
 
Last edited:
Well, the above post was supposed to be a PM but guess I screwed that one up!
 
Last edited:
Status
Not open for further replies.
-
Back
Top