Lowering Center link (drag link)?

Thanks guys. I am using a motor plate and the mounts are all welded in. I need to see what shimming the plate will do to the header clearance in other areas. Thought I had this issue handled, but after driving it a bit, the center link is still rubbing. I switched to a 72 center link set up because I got more clearance with tie rod ends, but now I'm having the oil pan clearance issue.

I'm going to keep reviewing some old threads and see what I can find. Ordered the manual that was recommended too.

Long story short, should have went with a small block. Thanks for all the help!