3.55 65 dart

-

Road/Rage

Well-Known Member
Joined
Dec 10, 2019
Messages
181
Reaction score
43
Location
KY
Does anyone have any videos of there slant six darts, doing burn out with sure grip rear end?
Im putting a 3.55 in mine just curious to see how much of a difference it makes. :confederateflag:
 
No video, but i can spin both wheels with my slant with a 3.10 (ford) rear-end. But only if the brakes are on!
 
3.55 with auto will fry tire holding the brake, my 3.55 with a four speed will fry the whole intersection, with 255 60 15x7. So you should be good! That’s a hell of a difference right there 2.45 and 3.55.
 
My 340 3.55 rear would burn the plastic 10" Pos-A-Traction tires to the ground if I stayed in it through 2nd gear. Never stayed in it to 3rd. Slant could do it in a light A
 
My 340 3.55 rear would burn the plastic 10" Pos-A-Traction tires to the ground if I stayed in it through 2nd gear. Never stayed in it to 3rd. Slant could do it in a light A
I think so too. My slant is performance built. I think I can chirp a tire with a 3.55!
 
3.55 with auto will fry tire holding the brake, my 3.55 with a four speed will fry the whole intersection, with 255 60 15x7. So you should be good! That’s a hell of a difference right there 2.45 and 3.55.
Good I dropped ot off at the builders shop today gonna freshen it up and get ready for install!
 
I had a 7.25 SG in that before I broke it doing a neutral drop going backwards down a driveway. The 7.25 SG is not as weak as the peg leg sister.
 
I think its a 2.45 open end...
7.25 rear

Likely 2.94's but one thing is for sure you will destroy the 7.25. They do not like heavy duty work. I have blown out quite a few.

upgrade to a 8 1/4 or 8 3/4, unless you want to destroy the 7.25. The 7.25's are cheap and everyone is trying to get rid of one so you may have an endless supply.
 
-
Back
Top