400 Non Stroker Build

CID. BORE. STROKE
340 - 4.04 - 3.31
400 - 4.342 - 3.38 (also seen 3.375)

.007 stroke increase for the B engine.
.302 Piston diameter increase for the 400
Looks like it’s a BIG BORE small block.

Correct me if I’m wrong ...
Stock piston height is 1.812
The KB 240’s have a 1.908 height vs a stock 440 of (if I’m correct...) 2.061. = .153 taller for the 440 slug.

Now how far down the hole are the stock pistons?
If your figure for the stock slugs compression height is right, (i am NOT questioning you, sir), my calculations show them .122 in the hole, assuming g blueprint specs.
So, what is that, 7 1/4 to one?