V Band Clamp Question
I am considering adding V Band Clamps to an existing exhaust system, to make disassembly easier for engine pulls.
I bought a set of Summit V Band clamps and noticed that the depth of the diameter for the exhaust to print into is only about 1/8 of an inch.
For ease of installing, less critical on the straightness of the exhaust pipe cut and length I was hoping for more.
Is that print depth standard across other V Band clamps?
![1C15EB53-6059-4037-9F66-0EA981E46C63.jpeg 1C15EB53-6059-4037-9F66-0EA981E46C63.jpeg](https://www.forabodiesonly.com/mopar/attachments/1c15eb53-6059-4037-9f66-0ea981e46c63-jpeg.1715733883/)